正規的賭博軟件

聯係方式

正規的賭博軟件
地址:浙江桐廬經濟技術開發區工業園區三達路87號
電話:0571-64251878 64251868
傳真:0571-64251898 

鍍前除油過濾機

鍍前除油過濾機除了能分離鍍前除油清洗溶液中的固體懸浮物外,還能分離懸浮的油粒和吸附乳化分散的油花,以保證進入鍍槽的工件表麵能完全被溶液所浸潤,防止出現局部漏鍍或結合不良等質量問題。鍍前除油過濾機主要由:自吸泵、過濾筒、除油筒及閥門等組成。使用時除油過濾機的進出液管分別固定於除油清洗槽的長邊兩側,使除油過濾機與除油清洗槽構成閉合回路作連續處理,過濾筒通常配楊桃濾芯,如客戶要求也可選擇繞線濾芯和疊片濾芯,除油筒內裝入由特殊材料製成的吸油介質。

These filters besides can separate the solid suspension substances, also can separate the suspension oil particles and absorb the emulsified and dispersed oil showings, thus to ensure that the surface of the parts put in the plating bath can be completely infiltrated and prevent partial plating from leaving out or avoid quality problems of bad connection. The pre-plating degrease filter principally consists of self-priming pump, filter cylinder, degrease cylinder and valves etc. The solution inlet and outlet pipes of the degrease filter should be fixed separately on the internal wall of bath long sides of the degrease bath, thus make the filter and degrease bath into a closed circuit and can work continuously. In general, the carambola cartridge is fitted for the filter cylinder. If the user demands, the wire-wound or laminated cartridge also can be selected. The adsorbed oil agent made of special material is put into the degrease cylinder.

版權所有:正規的賭博軟件
浙ICP備17033480號
澳門現金棋牌官網_首頁|手機博彩軟件【官網】|正規網賭網站,官方網站,遊戲注冊下載!!!|樂遊棋牌-Wellcome|幸運快三【官網】|金沙棋牌在線_首頁登錄| |